Delegate Nano Titanium 1″

• Single Voltage, 110 – 127V, 60Hz
• Variable Temperature 310º

• Set temperature gauge from 310°F to 450°F (232°C)
• The temperature will automatically lock after 2 seconds once you’ve chosen your desired temperature.
• To unlock the heat setting touch the + symbol and then the — symbol to unlock the heat setting.
• Allow the iron to heat up approximately 10-30 seconds
• Brush the hair and separate into sections about 2 inches professional comfort wide and place the section between the plates as close to the scalp without touching it. DO NOT TOUCH THE SCALP
• Hold plates firmly closed with hair section in between, sliding the iron down and off the section of hair. DO NOT HOLD THE HAIR BETWEEN THE CLAMPING PLATES FOR MORE THAN 2-5 SECONDS (depending on hair thickness)
• After one section is straightened move to another section and repeat the process until all the hair is straightened.
• Upon completion turn the appliance switch to the off position, unplug the cord and allow the unit to cool down completely before storing.

Flat Straight: Insert a 2 inch section of hair between the plates, then squeeze the handle together and glide slowly through the hair from the roots to the ends.

Soft Curls: Insert a 2 inch section of hair between the plates, then gently squeeze the handle together and glide the iron to the ends, while winding the hair around the plates.

Flip Out: Insert a 2 inch section of hair between the plates, then squeeze the handle together and slowly glide hair together beginning at the roots, slightly flipping out the ends.

Flip In: Insert a 2 inch section of hair between the plates, then squeeze the handle together and slowly glide hair together beginning at the roots, slightly flipping in the ends.

• Before cleaning your styling iron, always unplug the appliance from the power source and allow it, to completely cool down.
• If your iron does not have product build up, Sequence recommends wiping the appliance down using a damp, soft cloth.
• Do not use harsh detergents, abrasives, solvents, or chemical cleaners if you start to get product build up.
• NEVER immerse the appliance in water to clean.
• For Irons with product build up, use only flat iron formulated cleaners. These non-toxic cleaners quickly and safely remove build up from most styling products.

Please visit www.SequenceHairSystems.com for more information on this product.

• When appliance is not in use, unplug it.
• Allow the unit to completely cool down before storing.
• Store in a dry location and away from children.
• Do not wrap the cord around the appliance since this may cause the cord to wear.
• Regularly check the appliance for wear and damage, particularly to cord and plug.
• WARNING! If any malfunction does occur, do not attempt to repair. The appliance has no user-serviceable parts.

It is important to read all the safety instructions before using your Sequence Delegate 1′ Nano Titanium Digital 450 styling iron and save them for future reference or new users.

Remember this is an electrical device and the clamping plates and intended to reach very high temperatures up to 450ºF.

• Keep this appliance out of the reach of children.
• WARNING! To protect against electric shock, never allow the appliance, its cord or plug to come in contact with water or any liquid. Do not use in bathtub or shower. Do not place near sinks or baths or anywhere the unit may tall in liquid.
• NEVER reach for any electrical appliance that has fallen into water Switch off power supply at the main breaker, then unplug. DO NOT attempt to re-use iron if it has been submerged in water.
• Do not handle with wet hands. Insure that hands are dry before operating or adjusting any switch on the unit or touching the plug.
• To avoid potential damage to property, never leave unattended while plugged in.
• Unplug after use, If iron is switched off, the electrical current still reaches the iron.
• Use close supervision when iron is being used by, on or near children.
• Keep cord away from heated surfaces. Do not wrap cord around iron.
• When heated, DO NOT TOUCH with bare skin or put down on bare surfaces.
• Plug into a suitable main socket and touch the ON symbol to turn on the iron and adjust the temperature with either the + or – symbols.
• Always inspect appliance before use. Pay particular attention to the condition of the cord and plug. DO NOT use with a damaged cord or plug.
• Do not use if appliance has been dropped, left outdoors, submerged in water or if it is not working according to instructions.
• WARNING! If any malfunction occurs, do not attempt to repair it. This appliance has no user serviceable parts.

Sequence Finishing Tools styling irons are manufactured to the highest standards and will provide you with superior performance when used in accordance with the instructions in this manual.

The device is guaranteed against defective materials or workmanship for 1- Year. It also insures you a timely response to your warranty requests. Sequence cannot guarantee the quality of products sold by unauthorized dealers. Purchasing Sequence products from Internet sites not legitimately representing Sequence products forfeits the warranty.

• Product must be registered within 90 days to validate warranty (warranty card enclosed).
• Please keep a dated receipt as proof-of purchase. The date of sale and the seller’s stamp is required for the validity of the warranty.
• Warranty does NOT apply to devices showing abuse, damage, or to our judgment are not defective.
• Warranty is NOT valid if damage has been caused to the product being dropped or if repair has been attempted by any unauthorized person.

• What is the return policy?
No refunds
Exchanges will be made on equipment with in 30 days from the date of purchase
Requests for returns/refunds must be approved in advance (2days) and are subject to a 20% restocking fee
Returned equipment must be in original carton and in new condition

• In the unlikely event that the product is found defective please return the appliance in its original packaging with a check or money order in the amount of $49.95 for shipping, handling, and processing and you will receive are placement within 7-10 business days. Please also include your most current mailing address and phone number and E-mail.
• Nothing in this guarantee excludes, restricts or otherwise affects your statutory rights.

Please register your product online at www.SequenceHairSystems.com
Sequence Professional Products
P.O. Box 42
College Park, MD 20741
www.SequenceHairSystems.com